This paper provides an overview of the outcomes of the research

program, some of which require further research before implementation. It is suggested that an entire supply-chain approach be applied to establish Adriamycin the most efficient and cost-effective way of reducing the incidence of high rigor temperature.”
“The classic Jones fracture involves the fifth metatarsal at the level of the proximal diaphyseal-metaphyseal junction. The mainstay of surgical treatment for the Jones fracture is intramedullary screw fixation. There is no consensus of the type or material of screw that should be used. The purpose of this retrospective cohort study was to test the hypothesis that there is no clinical difference in the incidence of healing, or complications, when comparing stainless steel to titanium cannulated screws used in Jones fracture open-reduction internal fixation (ORIF). Data were collected on a total of 53 patients (fractures) that were fixed with either cannulated titanium screws (Ti

group) or cannulated stainless steel screws (SS group). The postoperative protocol was standardized. The mean time to radiographic union was 11.7 +/- 5.1 weeks in the Ti group and 13.4 +/- 5.7 weeks in the SS group (P – .333). The overall union rate for the Ti group was 36/37 (97%) and 14/16 (88%) in the Bromosporine in vivo SS group (P = .213). Complications were rare in both groups,

and the prevalence was not statistically significantly different (P > .05). There was 1 patient with an asymptomatic radiographic nonunion in the Ti group, and this SB273005 patient elected not to undergo revision. There were 2 nonunions in the SS group. One was revised and went on to heal and the other is awaiting revision. Our study has demonstrated the decision to use stainless steel or titanium can be left to patient constraints, such as allergies, or physician preference without compromising the clinical result. (C) 2011 by the American College of Foot and Ankle Surgeons. All rights reserved.”
“A fuzzy expert system was used in this study to control an intelligent air-cushion tracked vehicle (IACTV) as it operated in a swamp peat terrain. The system was effective in controlling the intelligent air-cushion vehicle while measuring the vehicle traction (TE), motion resistance (MR), power consumption (PC), cushion clearance height (CCH) and cushion pressure (CP). An ultrasonic displacement sensor, pull-in solenoid electromagnetic switch, pressure-control sensor, microcontroller, and battery pH sensor were incorporated into the fuzzy expert system (FES) to experimentally determine the TE, MR, PC, CCH, and CP.