6 U of TrueStart Taq DNA polymerase (Fermentas, Lithauen) and 10 μM of both oligos in a 20 μl volume was performed. The program consisted of activation step at 95 °C

for 3 min and 5 cycles of denaturation at 95 °C for 30 s, annealing at 55 °C for 30 s and extension at 72 °C for 15 s. Final extension was 15 min at 72 °C. Template Ponatinib in vivo oligo sequences are listed in Additional file 3. Ninety-six templates were divided into four pools and each pool was tested separately with all of the probes on the microarray. Ligation reaction Ligation reactions were carried out in a 10 μl volume containing 1X Pfu ligase buffer (Agilent Technologies, Santa Clara, CA, USA), herring sperm DNA (Sigma-Aldrich, Steinheim, Germany), 30 mM tetramethylammonium chloride (TMAC; Sigma-Aldrich, Steinheim, Germany), about 200 ng of environmental template DNA, 400 amol of each probe and 2 U of Pfu ligase (Agilent Technologies, Santa Clara, CA, USA). The reaction was LDE225 nmr cycled for 20 rounds at 94 °C for 30 s and at 56 °C for 8 min in a thermal cycler (MJ Research, MA, USA). PCR from ligated probes The PCR reaction mixture for amplification of circularised ligation products contained 1X Paq HS buffer (Agilent Technologies, Santa Clara,

CA, USA), 200 μM of each dNTP, 0.5 μM forward primer (5′-Cy3-CGACGTTGTAAAACGACGGCCAGT-3′), 0.5 μM reverse primer (5′-phosphate-TTTCACACAGGAAACAGCTATGAC-3′), 2.5 U of Paq5000 DNA polymerase (Agilent Technologies, Santa Clara, CA, USA) and 10 μl of ligation reaction in a final volume of 30 μl. The PCR program consisted of activation step at 95 °C for 3 min and 35 cycles of denaturation

at 95 °C Exoribonuclease for 20 s, annealing at 58 °C for 14 s and extension at 72 °C for 5 s. The PCRs were done in Arktik thermal cycler (Finnzymes, Espoo, Finland) with block-mode temperature control using manufacturer’s PCR tubes. Microarrays The microarray experiments were performed on Arrayit or Agilent microarray platforms. The 16 compartment slides purchased from Arrayit (Sunnyvale, CA, USA) were designed and used as described previously [42]. Briefly, for hybridisation to Arrayit microarrays, a mixture containing 20 μl of PCR/lambda exonuclease reaction, 5X SSC, 20 μg of herring sperm DNA (Sigma-Aldrich, Steinheim, Germany) and 5 pmol of control oligo in a final volume of 60 μl was applied to each subarray according to manufacturer’s instructions. The hybridisation was carried out in the dark at 55 °C for 2 h. After hybridisation, the microarray was washed for 3X15 min in 0.1X SSC, 0.1% SDS and briefly with water. Finally, the slide was air dried. The high-density custom oligo microarrays were manufactured by Agilent (Santa Clara, CA, USA) in 8 X 15 K format. Each of eight subarrays contained 1500 cZipCode oligos in ten replicates. Hybridisation to Agilent microarrays was performed according to manufacturer’s instructions.