The extracts obtained were concentrated in rotary evaporator under vacuum. Out of the four extracts obtained the ethanolic and the aqueous extract were used for further studies. For preliminary phytochemical screening the ethanolic and aqueous extracts were screened by using battery of chemical test viz., determining the presence of Alkaloid by Dragendorff’s, Mayer’s test, Shinoda test

for flavonoid, Foam test for saponins, Salkowski www.selleckchem.com/products/forskolin.html test for steroid, Ferric Chloride test for tannins and phenolics, Biuret test for proteins.10 and 11 The ABTS radical scavenging activity was assessed according to the method of Re and co-worker.12 ABTS was dissolved in distilled water to a concentration of 7 mmol/L. ABTS radical cation (ABTS+) was produced by reacting ABTS stock solution with 2.45 mmol/L of potassium persulfate13 and the mixture was allowed to stand in the dark at room temperature for 12–16 h before use. The percent scavenging activity of the plant extract was determined by carrying out the percent inhibition which was calculated by the following formula and results were compared with ascorbic acid as standard. %Inhibition=Absorbancecontrol−AbsorbancetestAbsorbancecontrol×100 The concentration equivalent to ascorbic acid was calculated by plotting the values of the test extracts on standard curve of ascorbic acid.14 The ability of the D. esculentum to scavenge hydrogen

peroxide was determined according to the method of Ruch et al. 15 Plant

extract (2 ml) prepared by distilled water at various concentration was mixed with 0.3 ml of 4 mm H2O2 CHIR-99021 nmr solution prepared in phosphate buffer (0.1 M pH 7.4) and incubated for 10 min. The absorbance of the solution was taken at 230 nm against blank solution containing the plant extract without H2O2. Total phenolic content of the fern was determined by the Folin–Ciocalteu method. The ethanolic and aqueous extracts Phosphoprotein phosphatase of DE at a concentration of 1 mg/ml were analysed for phenolic content. The assay was performed in triplicates. In brief, 1 mg/ml of the extracts were prepared and diluted to 45 ml with distilled water. 1 ml of FC reagent was then added and the content mixed properly. After 3 min, 3 ml of 20% sodium carbonate was added and the mixture was incubated for 2 h with occasional shaking. The absorbance of the blue colour that developed was read at 760 nm. The concentration of total phenols was expressed as Gallic acid equivalents in mg/g of dry extract.16 The total flavonoid content was determined by following the Aluminium chloride colorimetric methods described by Lobo et al.17 Where, 1 ml of plant extract (1 mg/ml) was added to 2 ml of water and after 5 min 3 ml of 5% sodium nitrite and 0.3 ml of 10% aluminium chloride were added. Then 6 min later, 2 ml of 1 M sodium hydroxide was added to the solution and the volume was made upto 10 ml with distilled water. The red coloured complex formed was measured at 510 nm.